Labels & Packaging — Stickers

60lb Slit Back Labels & Stickers

More products
Our promise: if we print it wrong, we reprint it or refund you. See Reprints & Refunds

Price this item:

Your Price · CAD
Select a quantity to see your price

Order now and this item is estimated to be ready to ship by — select your options

* Please note that this is just an estimate. Actual production time may vary. Production starts once your proof is approved.

No file? Design it free in our studio — pick a template, type your words, done.→

Your file is checked free, instantly, right here in your browser — format, page count and size with bleed. It is never sent anywhere for this check.

Tap to choose your PDF — or drop it here

Print-ready PDF · CMYK · 300 DPI

Add to Cart unlocks when your options are priced and your file passes the free check.

No file yet? Save this configuration to your cart now, and upload the artwork from the cart later. Checkout opens once every selected item has its artwork uploaded or a Studio design attached.

Make it match

Carry the same artwork and colours across everything your products wear. Start from the same design in the free studio — or send us your file and our design team applies the same artwork to each product for you.

Square-cut labels and stickers on a slit-back sheet — peel one off and it goes straight onto the jar, box, bag or bottle. Full colour, glossy finish, priced instantly.

Product Details

About this label

A 60lb label stock with a glossy face and a slit back: the backing is pre-cut, so each label peels away cleanly instead of curling or tearing. These are square-cut labels supplied as individual pieces — the craft and retail choice, made for hand application on products and packaging.

Specifications

Sizes2" × 3.5" · 4" × 6" · 8.5" × 11"
Stock60lb slit back label, glossy finish
PrintingFull colour (CMYK) — 4/0 single sided
Quantities100 · 1,000 · 5,000 (the 8.5" × 11" sheet runs 100 or 1,000)
Turnaround4–5 business days, counted from proof approval
DeliveryFree GTA delivery on orders $150+ before discounts · Markham pickup

Proofs & turnaround

Every order is proofed before it prints. After checkout we email you a PDF proof — you have one hour to approve it or flag a problem; if we don't hear back, the proof is approved automatically and production starts. Turnaround times count business days from that approval, not from the order time. Ready orders can be picked up in Markham or shipped — shipping is blind, with no printer paperwork in the box.

No artwork yet?

No problem. The free Design Studio gives you ready-made label designs you edit yourself — your words, your colours, print margins built in. When it looks right, come back to this page and your design attaches to your order automatically — no file to prepare, nothing extra to pay.

Questions, answered

What does "slit back" mean? The backing paper is slit so the label peels off easily — no picking at a corner. It's the stock made for hand-labelling jars, bottles, boxes and bags at a kitchen table or a packing bench.

Are these roll labels? No — these are square-cut labels supplied as individual pieces. Rolls are a different product, wound for labelling machines; they're not in the online shop yet.

Are they waterproof? The glossy face shrugs off splashes and fridge condensation, but this is a paper label — it is not made for soaking or outdoor weather. For jars and dry goods, it's the right stock.

What file should I send? A print-ready PDF: CMYK colour, 300 DPI, with 1/16″ bleed on every side — the free check on the Order tab verifies size and bleed the moment you upload.

Where do I pick up, and what does delivery cost? Pickup is free in Markham. GTA delivery is free on orders $150+ before discounts — and because most of our customers are in Toronto and the GTA, orders never cross a border or sit in customs.

What if my labels arrive wrong? If the mistake is ours — wrong product, wrong quantity, or a defective print — we reprint or refund, your choice. Send us a photo within 14 days of delivery. The full promise is in Reprints & Refunds.

File Guide

Preparing your file

Send one print-ready PDF, built to the size you ordered. Files that meet this spec move straight into proofing; files that don't are stopped by the free check on the Order tab, with the reason spelled out.

  • Format: PDF only — one file, one page
  • Size with bleed: your finished size plus 1/16" bleed on every side (a 4" × 6" label is built at 4.125" × 6.125")
  • Colour: CMYK — RGB files are converted and colours may shift
  • Resolution: 300 DPI for all images
  • Images: embedded, not linked
  • Text: converted to outlines (curves) so fonts can't go missing
  • Safety zone: keep text and logos at least 1/8" inside the cut line

Print-perfect tips

  • Rich black: build large black areas as C30 M20 Y20 K100 — they print deep and even instead of washed out
  • Black text: set black text and fine print to K100 only (no cyan, magenta or yellow in it) so every letter stays crisp
  • Thin lines: keep lines and rules at 0.75 pt or heavier — anything thinner can break up or drop out on press
  • Small type: keep text at 8 pt or larger at final size so it stays readable
  • Borders: don't run a border or frame tight against the trim edge — even a hair of trim shift makes it look crooked. Bring borders well inside the safety zone, or leave them off
  • Hidden extras: delete hidden layers, unused objects and white boxes sitting over your art before you export — a white box left on top can hide part of the design
4" × 6" Label Keep text inside the green safety zone

Blue = bleed edge (4.125" × 6.125") · Red = cut line (4" × 6") · Green = safety zone

Your Price · CAD Select qty